Do Not Make This Blunder With Your Outside Wood Burners

What You Need to Know About Outdoor Wood Burners

Outdoor wood burning stoves are a cost-effective method of heating homes and businesses. They also reduce the need for fossil fuels that are non-renewable and contribute towards a resilient energy strategy.

To ensure efficient burning it is essential to use seasoned wood. Wood that is not seasoned or green may have a higher moisture content, which can cause creosote to build up and decrease performance.

Efficient

Outdoor wood burners have been around for many years. They are an energy-efficient and environmentally friendly way of heating your home. However, the typical design of OWBs, which encourages an unsteady, cooler fire which results in less combustion and a higher amount of smoke, creosote, and particulates. These unburned fuels could cause health issues and fire hazards, as well as affect the environment around them.

Moreover, the visible smoke plume that OWBs produce can cause neighbors to complain. This could lead to DEC (Department of Environmental Conservation) taking enforcement action. This kind of issue could affect the value of your property, and may result in your OWB being closed down.

Crown Royal Stoves has a line of outdoor wood furnaces that are EPA Certified. The Pristine Gasification Series utilizes technology to maximize combustion efficiency and produce a smokeless, clean burn. This is accomplished through a negative pressure air system that draws in fresh, dry heated, filtered air from the bottom and then pushes it up the chimney at a much faster rate than traditional outdoor wood boilers. This is accomplished by an exclusive design that uses a multi-pass water filled heat exchanger made from 409 Titanium Enhanced Stainless Steel.

When used properly, the Pristine Gasification Series OWB can achieve a 99% combustion efficiency to create a cleaner, smokeless fire that requires less wood and generates significantly fewer emissions than traditional OWBs. To maximize the performance of your OWB it is essential to burn only clean, seasoned, dry wood. It is recommended that you season your wood for a minimum of six months or one year before burning it. This will result in an efficient and clean burn.

You can boost the efficiency of your wood-burning stove by performing each week a "dry burn". This method lowers the amount of creosote in your home which improves boiler efficiency and extends the lifespan of your boiler. By affixing a creosote-removing stick to your stove every time you fill it up, you can dramatically reduce the amount of creosote that you use. This product is available from Wisconsin Wood Furnace.

Clean

A wood-burning stove could be very dirty due to burnt soot particles. They are difficult to clean, so clean any buildup that may be on your stove's glass immediately. Any soot that is not eliminated will become hard, making it even more difficult. Using the right cleaning products for the job is crucial, but also be sure you're not damaging the surface of the glass with anything that might scratch it. This could result in an area of weakness that could break glass when exposed to extreme temperatures.

Before you begin cleaning your wood burner, it is important to ensure that it is unlit and completely cool. Be sure you surround it with newspaper. This will stop any spillage of ash that could stain and mark surfaces.

It could take up to one year for the seasoning process of your stove to be complete, depending on the quality of wood burning stove for shed you use. The wood that is seasoned will not only burn better and will produce less creosote. This is the kind of material that gets accumulated on your chimney, decreasing its effectiveness and creating an hazard for fire. If you are using unseasoned wood or are just making a fresh fire in your outdoor wood burner, the best thing to do is to open the back door to the lower part and scoop ashes out into a non-combustible container each week.

You should also perform an annual sediment flush on your boiler at least once every four years. It is a simple flush lasting five seconds from the bottom drain valve on your boiler. This will get rid of any sediments that have accumulated in the system and keep your boiler working efficiently.

After you have cleaned the exterior of your fireplace outside it is time to clean it. Before you begin, it's essential to cover the floor surrounding the stove with newspaper. It is also advisable to wear protective eyewear and gloves. Also, you should have a metal ash container as well as a scraping tool and shovel. To safeguard the refractory, you need to lay down a cloth to protect it from damage as you scrape away coal and ash deposits.

Easy to Operate

Outdoor wood boilers (also called outdoor furnaces or outdoor wood hydronic heating systems or outdoor wood heaters) are often misunderstood despite their popularity. They were one of the "it" trends of the 1990s, along with mullet hairstyles. These units are not the same as the well-known EPA wood stoves, which are made to burn low temperatures and continuously. They are able to produce an increased rate of fire and produce more smoke. This is why a few local governments regulate or even ban their use.

OWBs are ideal to heat homes with high insulation levels. The smoldering, visible smoke can also be a source of complaint with neighbors and has resulted in many OWBs being shut down or being sued in the past. To allow OWBs to function properly, they must be used with dry wood with low moisture content. Wood that is not seasoned or green can decrease efficiency, cause creosote to accumulate and reduce the life of the burner. A moisture gauge will allow you to determine how long it takes for wood to dry.

In contrast, dual-stage wood gasification boilers (OWGB) employ three steps of process that makes use of more available energy in the wood, resulting in a lesser amount of smoke. These furnaces are more efficient than conventional OWBs, and are suitable for a wide range of fuels. Wood gasification boilers need dry, seasoned wood. The majority of wood can be seasoned in one year. Oak and other hardy trees may take as long as two years. This is due to less water content and denser mass. This allows them to retain heat longer, thus increasing efficiency and reducing pollution. The EPA's "Burn Wise" website and Cornell Cooperative Extension can help homeowners learn more about how to burn wood efficiently, thereby reducing air pollution.

Low Maintenance

Modern outdoor wood stoves are designed to be eco-friendly. Modern outdoor wood furnaces do not generate excessive CO2 or heat. They also burn more efficiently than indoor wood burning stove wood stoves. They also use less wood to produce the same amount of heat as traditional stoves.

Outdoor wood burners require less maintenance and are more accepting of moisture content in wood than indoor wood burning stove wood burning stoves. However outdoor wood burners can only be used with properly seasoned or "cured" wood. Certain types of wood may last for up to a year. It is important to utilize a moisture gauge to determine the amount of water of your wood prior to loading.

During operation, it is necessary to check the system regularly for creosote build up. Creosote, which is a byproduct of combustion, can build up in the flue and chimney if they are not cleaned regularly. It can be eliminated by pouring a creosote removal product into the fire. Regular cleaning of the flue and chimney will eliminate dangerous creosote and increase efficiency.

To achieve 99% combustion efficiency, Crown Royal Stoves designed an innovative air flow technology called Negative Pressure Gasification. Our EPA certified Pristine Series outdoor wood burners near me furnaces utilize this technology to pull air from the bottom, directing all the gasses into an insulated water-surrounded secondary combustion chamber that is easy to clean Turbulators to ensure a smoke-free and pollutant-free burn.