Upvc Window Replacement Hinges: A Simple Definition

Choosing Upvc Window Replacement Hinges

Selecting and fitting upvc windows replacement hinges isn't as complicated as you think. It is important to check the arrow on the hinges is facing the correct way and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are several kinds of hinges to pick from, each one with distinctive features. This article will review the most commonly used kinds of upvc window hinge repair near me window hinges and the advantages they offer.

Egress/Easy Clean Hinge

These are a great choice to replace or upgrade your fire escape safety window because they can open to a full 90-degree angle. They can also be removed into an 'easy clean' position so that you can easily access the exterior of windows to clean them without the need to climb an overhang or climb a ladder at potentially hazardous angles.

These heavy-duty egress hinges are manufactured by Yale one of the most well-known and trusted home security brands on the market today. They are suitable for all kinds of uPVC side-hung windows. By pressing a small button the window sash can be slid to the side and into the clean position. After closing, the sash will automatically return to its original position.

Both 13mm and 17mm are available. Based on the size of your window, we recommend using our Egress Selection Guide to determine which one is the best fit for your needs.

The hinges are designed to work with standard side-hung frames that is made of aluminium or uPVC. They are equipped with a simple friction screw to adjust the amount of resistance generated. This makes opening the windows simpler and less likely of accidental closing during high winds. They have been cycle tested to over 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to use and doesn't have any buttons or catches. It offers a convenient and safe solution for emergency exits and cleaning. Firstly, open the window to the egress (full opening) position, and then press the hinge retaining clip located on the inside of the bottom corner. This will open the top and bottom catches, allowing you to slide the sash into the easy-clean position. Once it is in the easy-clean position, close the window to reset the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace windows that open sideways for fire safety reasons. These types of window hinges open wider and faster than standard hinges to allow an open space for escape in the event of an incident of fire. This kind of hinge is required in any living space that has a window, as stipulated by building regulations.

They feature an exclusive friction stopper that allows the window to open at an angle of 90 degrees. It also allows the opening sash to slide across when open to make it easy to clean the outside of the glass, without having to use ladders. The hinges are simple to operate and do not have complicated buttons or catches. They can be operated from inside of the house using a safe, simple lever.

The hinges are produced in the UK by Cotswold and come with a child safety restrictor for use throughout the day that can be overridden with a hidden button, giving you peace of mind that your children will not accidentally open the door too far. The stack heights are 13mm or 17mm.

To order these hinges simply take a measurement of the length of your current side hung window hinge that fixes to the frame (see the guide on measuring your upvc window hinges). Then select the correct size hinge from the options below.

Be aware that the measurement is taken from the part that is fixed to the frame, not the sash. The real hinge length could be shorter or longer based on the manufacture of your old windows. Also, when selecting the size of your hinge, most windows made of upvc will have a 13mm stack height. However, should your window frame is 17mm wide, you should select the option to use this. You can also install the 4mm packer to make up the difference. All the hinges are supplied handed (1 left and 1 right). The hinges are not equipped with screws. If needed, they can be purchased separately. We recommend using our Upvc window hinge repair screws. They are specially designed to improve the performance of your hinges and allow them to function efficiently for a longer. They have a lower friction design and an improved weather seal with a new nylon reducer end cap.

Restricted Hinge

There are occasions when windows must open fully and this can be a problem with a standard hinge. These child safety hinges are a solution to this issue and provide a solution when ventilation is needed but access for cleaning or escape in the case of fire is not feasible. They work by restricting the amount that the sash can open and allow the to override this restriction by pressing the push of a button. They are available in 13mm and 17mm stack heights and are suitable for top and side-hung windows.

The Nico Restricted Egress Friction Hinge combines the advantages of a standard restrictor with a fire escape hinge to provide an effective and simple way to comply with building regulations. It is suitable for both side hung and top opening uPVC windows and is available in 13mm and 17mm stack heights. It is offered in a pair, where one hinge is restricted egress, the other unrestricted allowing one of these to be installed on the lower part of the sash, while the other is attached to the top.

These uPVC restricting hinges have been tested to BS6375, part 2 and are designed to be used on windows that cannot be fully opened such as a small children's bedroom. The mechanism limits the extent to which the sash can open to a safety position of 100mm and re-engages when the window is closed.

As with the other types of wooden window hinges of uPVC friction hinges they can be installed on any type of window and are suitable for difficult to reach windows above the ground, three-storey flats or those that typically require a ladder to access them. They can be upgraded with our security features, including hinge guards and protection plates for the hinge or dog bolts to attain PAS 24 performance.

It is crucial to take measurements of the hinges on your window to ensure that you get replacements of the same size. The easiest way to accomplish this is by looking at the hinge in the gallery and determining where you want it to be positioned. Top-hung hinges are limited on both sides, while side hung hinges are restricted on one side.

Standard Hinge

A standard hinge uses metal-to-metal contacts and has no additional parts to decrease friction. It is available in a variety of finishes and also comes with a fire rating. To quickly determine the radius of a hinge, lay it out flat and align a quarter dime in two corners. If the quarter fits better, then the corner should be round to 5/8 inches.

The proper hinge can enhance or break the look of your door. Matching the style and design of the hinges to your door will create a cohesive and attractive design.