Fitting A Cat Flap

Installing a cat flap might seem intimidating but it's simple by following the correct instructions. Firstly, determine how high you would like the flap to be (on average, belly height). Then, mark this area on the door and then use the template provided as a guideline to drill.

If you have a kitten, or a young kitten you can prop the door slightly open and gradually push it to go through. Reward the kitten as it goes through.

Take a measurement of the door

A cat flap allows your pet to enter and exit your home at its convenience. This can help keep your cat in good health as it ensures that it gets enough exercise and be able to go back inside when it is trapped outside during bad weather. It also can reduce the amount of time you'll have to let it out or in and will also help ensure your home is secure by letting you know when it has gone out.

It is important to make sure that the cat flap is placed correctly to stop your pet from being pushed through or escaping through it by other animals (e.g. dogs). It is important to measure your pet's belly height and the doorway to your home so that you can ensure that the flap is at the proper height. You can adjust the height of your flap when your cat is taller or less than the average.

The next step is to use a spirit level to mark the center of the door. This is where you will put in the flap. Then, using the marks as an outline, cut the shape of your flap using the aid of a Jigsaw. Once you have cut out the space, sand down the edges of the door to create smooth surfaces and drill any fixing holes required.

Fitting a cat flap should not take more than two hours. The process can be slightly more difficult if you have to install it in a uPVC door or composite one. This is due to the fact that these doors come in various thicknesses, which can affect the way holes are cut. We recommend that you call an expert when this is your first time working with glass.

Measure Your Cat

A cat flap can spare you from listening to your pet meow for you to let it out or in. This is particularly helpful if you are at work all day and your cat is in the house waiting for you to get home in all weathers.

If you are planning to install a cat flap inside your door, it is crucial that you measure your cat before attempting the task. Although it might appear to be a simple operation it is crucial to make sure you measure correctly or your cat will find it very difficult to use.

First, ensure that your cat is calm and not stressed prior to taking the measurements. You will have to hold your cat in a place in which they cannot move. Also, ensure that the measuring tape is flat and not curved against the body. Keeping the ruler or measuring tape against their body from their head to the tip of their tail will allow you to determine an accurate measurement.

Once you've figured out the measurements of your cat, it's time to look at the door and decide where to place the flap. The best option is to position the flap in the middle of your cat flap double glazing's stomach as this will allow them to get through it without much effort. This will also prevent the flap making quite a lot of noise when it swings open and shut.

You must consider the thickness of the upvc cat flap door panels or composite door, as well. While all timber doors have the same thickness, uPVC or composite doors are different in their overall structure. This makes fitting the flap for your cat more difficult as you have to make sure that the hole is the right size.

You can make use of the template included in the instructions to mark the position of the hole in the door. This will help you determine where the opening must be and make sure the template is placed correctly on the door. Using a spirit level to ensure that the template is sitting flush against the door will be extremely helpful.

Cut the Flap

Before you can install your cat flap, you'll need to cut the door panel to make it large enough to accommodate it. This is a difficult task and it is recommended to get help from an expert cat flap fitter for this job if you don't have the knowledge or skills to tackle it yourself. You can also read the instructions provided with the kit to learn how to do it right.

To do this you need to measure the height of your cat or kitten's belly. Use this as a reference point. A good guideline is to put the flap around 10-15 centimeters away from the ground since this is roughly the average belly height for cats. This way your cat can move through the flap with ease and will also make other cats or snooping neighbours a tough time trying to leave or enter.

Once you have determined where the cat flap should be placed, mark this location on the door using pencil. If your kit includes a template for paper, place it over the door and use the markings to drill holes in each corner of the template. Then, you should be able cut out the template and replace it with the cat flap.

If you are installing your cat flap inside a door made from wood or upvc door panels cat flap, you are able to do this yourself if you are comfortable with the Jigsaw. Be careful not to cut through the vertical rails or mullions of your door. You can use a jigsaw to cut your panel into a circle or square depending on the way you'd like to cut it. Take your time and don't force the jigsaw into cutting faster.

After the hole has been cut, carefully fit the cat flap into its new location and make sure that it is securely secured. If the flap has screw caps put them on the protruding bolts. After the screws are installed then sand the rough edges and seal any gaps. This will stop draughts from entering your home.

Fit the Flap

If you have an ordinary cat flap, you can try to encourage your pet to go through it by placing a small amount of cat food on the top of the door. Alternately, you can push the cat through using your hands or a stick. Once your cat is used to moving through wall cat flap the flap, it will be able to move in and out as it pleases, so you can let it out or in without having to be there to open the door for it all day (and possibly in all weathers).

It is possible to fit a cat flap in a UPVC door or a glass door, but it may not be as simple as putting one on a wooden external door. This is because the doors made of UPVC and some kinds of glass doors do not have an even thickness. This could have a dramatic effect on the way you cut the opening for the flap and can also affect whether your flap will fit properly once it's installed.

Depending on the model of cat flap you select It could come with its own mounting kit and template that will tell exactly where to drill the holes for it. If the kit doesn't include a template, you are able to create one by yourself. When cutting, it is important to keep the jigsaw from being pushed too far enough to create a bigger hole than necessary in your door.

Most cat flaps are square or rectangular in shape, however there are some that are circular and these are typically more difficult to install. If you have a round flap, make sure that the hole is located in the correct spot on your door. If not, your cat might not be able to access it, and could be stuck outside the whole day (or night).

Certain models of cat flaps (read what he said) come with locks that permit you to regulate when your cat comes and goes. These are useful if your pet is afraid of leaving in the dark, or coming back inside at night. They can also be helpful for those who work all day. Certain locks can be used for entry or exit, and others can be locked both ways. This is beneficial for sick or older cats who do not want to venture out in cold weather.